• Welcome to Greater Southwest Aero Modelers Chat Forum. Please login or sign up.
 

Scratch Built Fuel Caddy

Started by Lane C., May 12, 2014, 05:56:11 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Lane C.

Got mine stolen by the mongrel horde the other day, so had to stop all other projects to build a new one. This one will have places for TWO gas cans - one 32:1 mix and one 16:1 mix (Saito 3 cylinder Radial). And it will have up to two 12 volt batteries if I need them. One will be enough, but may add one more for more zip. 1/2" plywood from Lowe's glued and air nailed together. Nothing really fancy, just handy to have a fuel caddy.






Current Build = 1/3 BUSA Fokker DVII

Lane C.

May 13, 2014, 12:39:14 PM #1 Last Edit: May 13, 2014, 06:59:28 PM by Lane C.
A little trim and a couple of coats of clear poly. Need a power panel and fuel pump.



Went to Roy's today to get a new panel and pump. This project is pretty much finished. Need to rig the new gas can with the clunk and new gas lines, wire to the pump and panel, and that's it.

This time around, I may just keep the gas can itself at the field. I'll take the caddy with me. Too much work and $$$ to lose it again.

Current Build = 1/3 BUSA Fokker DVII